New shoes always tend to have Slippery Soles. However, after constant use, your favorite pair of footwear gains traction and become slip resistance.
In cold winter weather, it can get difficult for you to walk on snow and wet surfaces, making you very cautious of your steps. Walking on this snow requires shoes with high slip-resistance features like steady soles that offer secure ground grip.
Slip-resistant shoes feature unique Rubber Outsoles designed to handle greasy, wet, or slippery floors and a tread design that directs Liquid Flow out from below your feet to help you gain more Traction.
If your pair lacks these features, you can use the techniques below to make your footwear slip-resistant.
Table of Contents
How to make shoes slip resistance
#1. Use Anti-Skid Pads
These are self-adhesive pads that utilize abrasive and grainy surfaces to stick to the bottom of your shoe and thus prevent sliding. They offer a very effective way to make your shoe slip-resistant by improving traction on any surface. You simply have to apply them at the base of your shoe, and you can be sure to have your boots become capable of handling slippery surfaces with ease.
A great example is the 16 Pieces Non-Skid Shoe Pads. A simple Self-Adhesive shoe pad that provides great traction and adds non-skid feature to your shoes, the product is both highly effective and surprisingly inexpensive.
Its great for a variety of shoe types and occasions. You will never be worried about falling or sliding, these a6 pieces non-slip outsoles will have you protected.
#2. Add an Insole
Every individual tends to have a unique footprint, arch angle, and even rate of pronation. This fact makes it hard to find a balance or stability when wearing any type of shoes. This is because most shoes are designed to have a standard universal fit, whereby it is hard for a single pair to fit a large number of people. Insoles can be added to provide a more personalized fit, reducing the chances of skidding or slipping. The right insole also helps with arch support reducing back pain.
ASTRQLE Silicone Gel Reusable Honeycomb Full Length Non Slip Insole, is a great for both sports and work boots. Its made from silicone and an air cushion damping shoe pad cushion; for better comfort and anti-skid protection.
It Absorbs sweat and provide deodorization function to ensure your feet and shoes have maximum traction, thus eliminating skidding which might cause accidents and injury.
#3. Use Glue and Sand
Another technique that can improve the grip of your shoes’ soles is using adhesive rubber glue and sand. Make a mixture of the rubber and sand then apply a thin layer to the bottom of your shoes. This adds a rough layer on your shoe sole.
This rough layer will increase friction and traction between the shoes and walking surface, giving your shoes a better grip and thus minimizing the chances of sliding and getting injuries. Sand can be easily substituted with Salt or Glue Guns (Available on Amazon) for this technique.
#4. Use Coating, Water-Proof or Hair Spray
Adhesive coating spray can be used to make your shoe slip-resistant instead of grip pads. It is a quick, inexpensive way, and works well, especially in wet weather.
It is also straightforward to use; you just need to simply spray the bottom soles of your shoes to get the right anti-slip protection you deserve.
It’s recommended to cover the shoe surface just above the sole with masking tape to prevent damaging the shoe surface.
Water-Proof spray creates slip-resistance on various surfaces, including snowy streets, slippery sidewalks, gym floors, wooden kitchen floors, or office floors. A great Example is the Rust-Oleum Never wet Boot & Shoe Spray.
The Water-Proof spray can be substituted with adhesive coating spray or hair spray when making a short fix for slippery surfaces.
The hair spray can also be used since it has a sticky ingredient that temporarily makes shoe slip-resistant. This technique will, however, be re-applied frequently or daily as it wears off quickly.
#5. Scuff Your Soles
Besides the shoes that are specialized to enhance your grip, many new shoes have a slippery bottom sole. If you realize your new shoes have no traction, simply scuff them on a rough surface just enough to prevent sliding.
You can also cuff your shoes by rubbing a piece of sandpaper or nail file against your shoe’s soles until the smoothness has been reduced. The scuffing should be minimal to prevent destroying the bottom of the shoes.
You can optionally apply Shoe Goo (Available on Amazon) for extra grip and traction; as shown in the video below.
#6. Buy a New Pair of Shoes with Proper Gripping
If work safety is paramount and you work on slipping surfaces such an oil rig, you may want to go for a permanent solution. At this point, the best solution would be purchasing a new pair of shoes specially designed to be slip-resistant. It may seem more expensive than all the other answers given above, but in reality, a new boot will always serve you better than an old one.
Read More: Best Women Boots with Good Grip
#7. Visit a Professional Shoe Cobbler
Some methods may require your extra time and effort, if you happen to be busy, visiting a cobbler should help.
The cobbler can repair, change the sole of your shoe or offer advice on the best method to use to make your shoe slip-resistant depending on the sole shoe material used.
Importance of Slip-Resistant Shoes in the Workplace
1. Reduce Accidents
Outdoor workers such as a market butcher or oil rig workers, or Service industry workers such as waiters/ waitress may require a specialized type of shoes or boots compared to someone working in an office.
This is why restaurant Workers highly prioritize slip-resistant shoes for work safety over everything else. Slip-resistant work shoes prevent accidents, especially in the hotel industry, where the floors are slippery due to water or drink spills.
Safety shoes are made with quality and long-lasting materials that offer you long-lived protection compared to other types of shoes.
3. Oil Resistance
Oil resistance is made from thick materials designed to repel oil. This kind of shoes also ensures work safety by preventing hot oil from splashing on your feet.
Your mind is at ease knowing that the chances of you sliding and falling or other kinds of work-related injuries are reduced to a minimum. It also increases your productivity.
Read More: Best Women Boots with Good Grip
Importance of Slip Resistance Shoes in Sports
1. Reduce Injury
Like many other professionals, athletes and sports persons require shoes that are slip-resistant to ensure that they are protected from slip and fall injuries that are prone to occur if their shoes lack traction.
2. Comfort and Safety
Sports such as tennis and golf where a lot of movement is involved require shoes with anti-slip soles to make the wearer comfortable and safe.
3. Maximum Productivity
The soles should have great treads to make sure you do not slide even when walking over grass or slippery grounds. Sports shoes are generally specially designed with these modifications of slip resistance to ensure maximum productivity of players and other sports people.
It is always good to wear comfortable shoes whose reliability reflects on an excellent performance. When looking for slip-resistant shoes. It is recommended to look for an open tread pattern simply because enclosed ones tend to trap water below your feet and cause hydroplaning.
Shoes with flat or smooth soles also behave in the same manner hence the need to go for slip-resistant shoes designed with an interlocked design on the sole to channel water away from underneath your foot.